- NEW! Custom sewn Director Chair covers for any size chair with round or flat stick attachment
- 100% Made in the USA
- Made from Sunbrella® acrylic marine grade fabric will not stretch, fade or shrink
- The same fabric used to make sails and in maritime furnishings
- Load tested to 400 lbs. – Rated capacity 280 lbs.
- 60 day warranty on all canvas – full replacement at no charge to you if it fails
- Includes the seat and back canvas, as well as the round 1/4″ diameter round sticks or 1/4 x 1/2 flat sticks if desired
- Many, many different colors to choose from. See swatches below
- Sunbrella® colors in the drop down list are stock colors. All other colors available by special order only for an additional $25. There is a 2 cover set minimum for all special orders. Please call to special order 866-732-8246.
Breathe new life into old chairs! We now offer a custom sewing service to create Director Chair covers to your dimensions. Fabric is top quality Sunbrella® marine grade acrylic material. Sunbrella is widely used for awnings, sail making, marine and outdoor furnishings. Directors chair replacement covers are easy to replace. Please read this Buying Guide article on how to Purchase and Install Directors Chair Covers.
Be sure to measure carefully when submitting measurements. You must attest that the measurements are correct as submitted and NO returns are accepted for correctly sewn covers:
NOTE: Our custom sewing service only offers the sewn material. Customer is responsible for installation of any option hardware i.e. grommets, bolts, rings, etc.
- The Seat Dimensions are measured from EDGE to EDGE. WIDTH is from side to side on the chair where the sticks are. DEPTH is from front to back. SEAT LOOPS will be sewn to fit the stick sizes indicated below, unless otherwise indicated. Measured from EDGE to SEAM, please enter your custom width.
- The Back Dimensions are measured EDGE to EDGE also. WIDTH is from side to side on the chair with the loops flattened out. HEIGHT is from top to bottom parallel with the seat posts. BACK LOOPS are measured from EDGE to SEAM, please enter your size needed.
- Oversize Charge: There will be a Oversize Charge PER DIMENSION if:
Back Height is greater than 8″
Seat Width is greater than 21″
Seat Depth is greater than 16″
Seat Loops are greater than 1.5″
We will notify you of the Oversize Charge in the Order Confirmation.
- Seat sticks: Round sticks are 1/4″ in diameter, Flat sticks measure 1/4″ x 1/2″. Two are included if needed – please indicate.
NOTE: If you choose “Yes” to “Do you need sticks included?” we will make the seat loops to fit our sticks. If you are ordering Round Sticks, we will make the seat loops at 3/4″. If you are ordering Flat Sticks, we will make the seat loops at 1″
Measure carefully to make sure the replacement sling fits your chair. Call us at 1-866-732-8246 if you need assistance.